Mechanical Broadhead Review

Rage Trypan NC Review

The most trusted head in the Rage line — a one-piece titanium ferrule and thicker blades that finally make a big-cut mechanical dependable.

Rage Trypan NC broadhead
Rage Trypan NC — Mechanical · 2.0" cut.

How it scored

Scored on our fixed 5-part system — built from the consensus of field reports, video tests and hunter feedback. Each axis is an independent 0–10 score. How we score ↗

What we liked

  • One-piece titanium ferrule is the toughest in the Rage line
  • Thicker .039-inch blades resist bending better than the Hypodermic
  • Field-point accurate out past 60 yards
  • Fewer deployment complaints than other Rage heads
  • Surgical entry and a destructive, blood-soaking exit

Where it falls short

  • Heavily vented titanium ferrule has been reported breaking on elk
  • Some lingering deployment doubts on marginal setups
  • Premium price for a single-use head

Flight & accuracy

The Trypan NC is the head that earned Rage a measure of credibility back. The chisel-tip, low-profile geometry flies like a field point well past 60 yards for tuned setups, and hunters routinely note they did not have to re-sight after switching from practice tips.

Crossbow shooters get a 150-grain option that stabilizes well at bolt speeds, and the overall flight reputation is a clear cut above the older Hypodermic in user reports.

Penetration

The one-piece titanium ferrule and stiffer .039-inch blades give the Trypan NC more structural integrity at impact than its stablemates, which translates into better penetration margin on bone and angled shots. It is increasingly trusted on elk, not just whitetails, which is high praise for a 2-inch mechanical.

It still obeys the rules of physics — a big-cut expandable wants energy. Community guidance lands around 55 to 65-plus foot-pounds for elk and at least the standard ~50 ft-lb deer floor. Feed it adequately and pass-throughs on deer are routine.

Durability & edge retention

This is the most durable head in the Rage catalog. The titanium ferrule and thicker blades survive shots that bend the Hypodermic's components, and many hunters recover the head reusable after soft-tissue passes (with fresh blades).

The honest asterisk: the ferrule is heavily vented to save weight, and there is at least one credible report of it breaking on an elk. It is tough for the class, but it is not indestructible, and heavy-bone elk hunters should weigh that.

Blood trail

Blood is where the Trypan NC earns our Best Blood Trail nod. The combination of reliable deployment and a full 2-inch cut produces the painted, short tracking jobs that mechanical fans chase. Entry is surgical, the exit is wide open, and recoveries are typically fast and obvious.

Because deployment is more consistent here than on the Hypodermic, you get the big-cut blood benefit without nearly as much of the gamble. That reliability is exactly why it sits at the top of the line.

Value & who it's for

At roughly $55 for three it is the priciest head in the Rage line, but it is also the one we would actually trust. For the money you get the toughest ferrule, the stiffest blades, and the best deployment record Rage offers.

It is the right pick for the whitetail or crossbow hunter who wants huge holes without the Hypodermic's anxiety, and a defensible elk option for hunters running adequate energy who place broadside shots. Bone-heavy elk specialists who want zero failure modes will still prefer a tough fixed blade or a SEVR 1.5.

Specifications

BrandRage
TypeMechanical
Cutting diameter2.0"
Blades2 rear-deploy
Grain options100gr, 150gr (crossbow)
Blade / steel.039" stainless blades
FerruleOne-piece titanium
Pack3-pack
Approx. price~$55 / 3-pack
Best forWhitetail, Elk, Crossbow

Specs and pricing are approximate and change frequently — confirm with the retailer before buying.

How it compares

FAQ

Is the Rage Trypan NC good for elk?

It is the Rage head most trusted for elk thanks to its one-piece titanium ferrule and thicker .039-inch blades. Run at least 55 to 65-plus foot-pounds and keep shots broadside. Be aware there is a credible report of the heavily vented ferrule breaking on an elk, so bone-heavy hunters should consider a tougher fixed blade as backup.

How is the Rage Trypan NC different from the Hypodermic NC?

The Trypan NC uses a one-piece titanium ferrule and thicker .039-inch blades versus the Hypodermic's machined stainless ferrule and thinner .035-inch blades. The result is better durability, more penetration margin, and notably fewer deployment complaints, which is why the Trypan is the more respected head.

What draw weight does the Rage Trypan NC need?

Stick to the standard expandable floor of roughly 40 pounds of draw and about 50 foot-pounds of energy for deer, and step up toward 55 to 65-plus foot-pounds for elk. Fast crossbows have energy to spare and pair well with the 150-grain Trypan option.

Sources

Sentiment for this review was aggregated from independent tests, hunting forums and retailer reviews, including:

Related reviews

Rage Hypodermic NC broadhead
Mechanical

Rage Hypodermic NC

When it deploys on a clean broadside shot it kills fast and leaves a soaked trail, but a long history of non-deployment and bent blades keeps it off our short list.

6.8/10
SEVR Titanium 2.0 broadhead
Mechanical

SEVR Titanium 2.0

The 2.0 trades some of the 1.5's penetration for a bigger cut and dramatic best-case trails, making it the deer-and-turkey favorite, though it carries the line's most documented failure reports.

7.7/10